Polyamide snap button with claws - sky blue


1 Item available

12 mm round snap button in polyamide and metal. It allows a simple opening/closing of your clothes. Snap button consisting of 4 parts: The male part (with a stem), the female part (with a hollow), the top claw and the bottom claw.

More details

1,65 €

Add to wishlist

Data sheet
Use Accessories, Customisation, Clothes and Apparel
Washing 40° normal wash
Ironing Low heat
Main color Light blue
Sold per 1
Sizes 12 mm
Material Metal, Polyamid
More info


The top claw and the female part assemble to form the button which will be on the top of the garment.

The bottom claw and the male part assemble to form the button that will be on the bottom of the garment.

Put the male button:


Take the bottom claw (picture 1) and position it under the fabric. Push its claws into the fabric (photo 2). Place the male part on the claws and keep everything flat. Using a nut placed on the male part (so as not to damage it), tap with a hammer a few tweaks.

Put the female button:


Munissez-vous de la griffe dessus (celle en plastique) et positionnez-la sur le tissu avant d'enfoncer ses griffes dans le tissu comme précédemment (photo 2). Posez la partie femelle (photo 3), côté creux sur les griffes (pour le repérer s’aider de la photo ci-dessus). Taper avec un marteau quelques coups secs (protégez la pression à l'aide d'un tissu chiffon).

Et voilà, il ne vous reste plus qu’à recommencer pour les autres boutons.

Bring the top claw (the plastic one) and position it on the fabric before pushing its claws into the fabric as before (photo 2). Place the female part (picture 3), hollow side on the claws (to find it look at the picture above). Hammer a few taps (protect the press button with a cloth).

And now, you just have to start over for the other buttons.

Need inspiration?

Make this beautiful blouse Marthe l'Enfant Roi with the snap buttons.